Wavlink WiFi extender is one of the most popular ways to extend the reach of your existing WiFi network. It rebroadcasts the signal from the primary router, essentially boosting the router’s range. But occasionally, this device creates problems and one of the most common ones is the Wavlink WiFi extender not connected to router. If you are one of them and unsure of how to fix it then don’t fret. You’re in the right location. We’ll talk about the troubleshooting hacks here to fix the issue. But before moving on to the solutions let’s talk about the cause of the issue first.
Causes: Wavlink WiFi Extender Not Connected to Router
There might be several reasons why the Wavlink WiFi extender not connecting to router. Here, we listed out the common one.
- The most typical cause is that your extender and router are on different channels.
- The extender has not been appropriately installed.
Note: Most extenders come with a setup manual or tutorial. It’s possible that you didn’t set it up correctly.
- The extender is no longer usable. If you have a dual-band or tri-band extender, the distance between the extender and the router may be too great.
- It is also conceivable that the extender does not have enough power, in which case it will require a power supply.
- Keep your extender away from any heavy metal objects, such as Bluetooth speakers, file cabinets, microwaves, and so on. You might also put it in an area with a lot of interference from other devices.
Troubleshooting: Wavlink WiFi Extender Not Connected to Router
Try the troubleshooting hacks mentioned below to remedy the problem. Check that you’re taking the correct measures to get the most out of your gadget and that your WiFi is working properly.
-
Check Current Router Status
First, make sure that your WiFi router is turned on and connected to the internet. On the front of the gadget, there should be a little green light. If the light is not turned on, push the router’s power button until it does.
-
Bring WiFi Device Closer
There is a possibility that your WiFi extender is too far away from your router. To do away with this problem, bring the Wavlink WiFi extender up to the router. To use this feature, the WiFi extender and router must be linked to the same Wavlink WiFi network. Once your Wavlink WiFi range has been increased, you may watch your favorite video streaming applications on TV and relax.
-
Perform a Factory Reset
If you still face the Wavlink WiFi extender not connected to router issue then you must reset your range extender. The placement of the reset button option in your WiFi range extender may change depending on the brand. The reset button will be on the back of your wireless range extender; push it for 10 seconds with a sharp pointed object like a pin. Keep in mind that this will remove all existing settings and allow you to set up your extender from scratch.
Just in case you have no idea how to perform the Wavlink extender setup then refer to the section given underneath.
Wavlink WiFi Range Extender Configuration
The Wavlink WiFi extender installation is quite easy. Follow the steps given below:
- Simply put the Wavlink WiFi extender into a power outlet. Wait for a couple of seconds till the LED turns green.
- Once done connect your host router to it using a Ethernet cable. Be sure that the cable connection is finger-tight.
- Now turn on your client device and fire up any web browser.
- Here in the location bar input the wifi.wavlink.com and hit the Enter key.
- In a few seconds, the login page will come into view.
- Fill in the admin credentials in the specified fields and login.
- The Wavlink setup wizard will appear on the screen. Adhere to the on-screen instructions and complete the process.
The Bottom Lines
With that! We put a full stop on our guide on how to resolve the Wavlink WiFi extender not connected to router. We expect that by following these easy steps you can easily resolve the Wavlink extender not connected to router issue.
